Mountainboard Achsen MBS Vector

[hangloose]

VERKAUFT!!

Biete ein paar Mountainboard Achsen MBS Vector + passende Kugellager an. Zustand ist absolut Top da nur 2 x damit gefahren wurde.

Super Kitelandboard Achse da sie schön leicht ist.

Preis 76 Euro inkl. Versand

Hier die Beschreibung von MBS:
MBS Vector Trucks

The New MBS Vector Truck is a hybrid channel truck from MBS. It works on the same principle as a channel truck but hasn't got the springs which are normally associated with this type of truck. Instead it uses a bushing normally associated with a skate truck. This setup saves a huge amount of weight and makes this the lightest channel truck on the market.

MBS Vector trucks with patent pending "Twin Pin Channel" truck technology provide the perfect blend between precision, weight, and economy by combining the attributes of the lightweight, easy to adjust, and inexpensive ATS truck with the world renowned precision and stability of the Matrix Channel truck. Added features such as a flat grind surface and the stainless M10 king pin and hardware guarantee that the Vector will be loved by weight-conscious kiteboarders, mountainboarders and skate park riders alike.
MBS Vector Truck Feature Summary:

Easy to Adjust: The rider has two levels of adjustment. First, they can tighten or loosen a single king pin to change turning resistance. Second, if they want a larger change in resistance, they can replace their bushings with ones of a different durometer.

High Precision: The precision of the Twin Pin truck is similar to that of the matrix channel.

Good Grind Surface: Designed with the ever increasing popularity of the rails in mind. The Twin Pin Truck has an unobstructed grind surface to be compatible with all types of rails/boxes.

Reversible Bottom Truck: The bottom truck can be rotated 180 degrees with respect to the top truck to provide an alternative board geometry. Position 1 (higher and shorter) Position 2 (lower and longer)
Specs:

Truck Type: Channel
Overall Weight: 0.75kg
Axle Width: 16"
Deck Tip Angle: 35 Degrees
Mounting Patterns: Standard 4 Hole Skate Pattern
Adjustment Bolt: 17mm
Material: Heat treated Aluminium