Einzelnen Beitrag anzeigen
Alt 01.08.2018, 11:49   #10
I-try
Benutzer
 
Registriert seit: 08/2007
Beiträge: 478
Standard

Nachdem mir gestern ein wenig die Erklärungen fehlten, habe ich Kontakt zu John Hibbard, Red Paddle Co., aufgenommen. John ist wirklich immer super hilfsbereit und offen für alle Fragen.

Hier ist ein Auszug von dem, was er mir schrieb:

While 15 psi gives ok stiffness on a 12’6” x 6” board there is no way that putting more pressure is not going to help. Sure you can ride at 15 psi but it will feel better, faster and more authentic at higher pressure. If you were to plot the stiffness on a graph then 0-15psi you see of course a big increase in stiffness. 15-22psi is another big jump in stiffness. 22-25psi the stiffness increase is less. Above 25psi it’s not really worth it.

So we’d always say 18-22 psi. It’s just that with the standard pumps it’s hard to get to more than 15psi.

More pressure is better. No questions about it. But you need a board built to take it and a pump that will help you make it!

Most brands will say max pressure 15-18psi. That’s not because their boards work fantastic at that pressure. It’s just the most pressure they dare to put in it.

You have to build the board correctly. Use the right joining tapes on the rails, use specially adapted high melting point glues and use the absolute best dropstich to be sure your board can take a high pressure.

Reds work fine at 15psi. Especially ones with RSS. But they become stiffer at higher pressures. So do all other brands. It’s simple physics. Other brands may well explode though.

We don’t need more pressure to have same stiffness. We will have better stiffness at 15psi than all others. Particularly our Boards with RSS.


Demzufolge wäre mein Fazit:

Red Paddle Co. SUPs sind auch bei 15 PSI mindestens genauso steif wie jedes andere SUP bei 15 PSI. Alle SUPs, egal welcher Marke, sind noch etwas steifer bei 18-22 PSI und das Fahrgefühl ist besser. Die Frage ist lediglich, hält das jeweilige SUP dem Druck (dauerhaft) stand und ist die Pumpe (oder die Muskelkraft) ausreichend, um das SUP mit bis zu 25 PSI zu befüllen.

Das hört sich in der Theorie natürlich toll an - ich kann nur jedem empfehlen, es einfach zu testen. Ich nutze auch immer gerne die Chance, andere Hersteller zu testen und zu vergleichen und finde es schade, dass ich bei vielen Herstellern leider bisher noch nicht die Gelegenheit hatte.
I-try ist offline   Mit Zitat antworten